Dizmm
07-15-2008, 02:10 PM
well, here is most of the mods that are being taken off the car. more pics will be up soon.
RM-DSM Front and Rear Sway bars w/(like new) end-links. $250 shipped
RC 550cc Injectors $150shipped
DSM-link v2 w/ECU $650 shipped
FMIC “kit” 2.5in short route I/C piping, 1g BOV (Crushed), in good condition with a few bent fins, used for only a few months at most. $350 shipped
lower I/C pipe (heat wrap included):
http://www.dsmsupport.com/images/asm/dizmmv2/02-06-08_1849.jpg
I/C:
http://www.dsmsupport.com/images/asm/dizmmv2/02-17-08_1721.jpg
Upper I/C Pipe and BOV:
http://www.dsmsupport.com/images/asm/dizmmv2/02-06-08_1853.jpg
http://www.dsmsupport.com/images/asm/dizmmv2/02-06-08_1943.jpg
FP Big T28 Turbo (in ok condition, probably could use a rebuild), compressor outlet turned 180degrees for FMIC setup. Best Offer
http://www.dsmsupport.com/images/asm/dizmmv2/IMG_3664.jpg
6 bolt crank, would need to be turned, $50 plus actual shipping
2g (1997) 7bolt crank, would need to be turned, $50 plus actual shipping
3bar GM Map Sensor with pigtail, $40 shipped
7 bolt ACT 11lb Flywheel, $75 shipped
Real HKS BOV w/recirculation kit and flange, $155 shipped
--------------------------------------------------------------
Wilwood 13in x 1.25in 4-piston brake setup:
HD Race Kit from Todd at TCE Performance
4piston Forged Superlite Caliper with stainless steel pistons
Steel tab mount brackets
Aluminum rotor hats
Directional Vane rotors
Gas slotted, Zinc plated
SS Brake lines
2-sets of the B compound Race Brake Pads
1-set of the BP10 "street/auto-x" pads
This is a complete BOLT-ON and go kit. This kit works AWESOME!!! There is no describing the braking power with this kit. This kit also works awesome with the stock rear brake setup, no need for adjustable poportion valves or bigger brakes in the rear.
Price is $950, that is nearly half the price that i paid for this kit bran new with all the stuff.
http://www.dsmsupport.com/images/asm/dizmmv2/03-20-08_1416.jpg
http://www.dsmsupport.com/images/asm/dizmmv2/03-20-08_1414.jpg
http://www.dsmsupport.com/images/asm/dizmmv2/IMG_4010.jpg
--------------------------------------------------------------
Full Coil-over setup:
Koni Sport Shocks ($620 bran new)
GroundControl sleeves, perches, & coaxial hats
RRE pillowballs
HyperCoil Springs (650lb Front / 425lb Rear)
Free install and corner-weighting service (provided by ASM Corner-weighting, central wisconsin)
These have about 20k total miles on them. I also have extra parts such as some helper springs, extra spring perches, extra set of softer springs, hats, ect...
Also I might add this is the suspension setup that JTCinders (Jtoby, DSMtuners wiseman and suspension gooroo) has designed and setup. This is near the best of the best suspension you can get. This setup has won Jtoby many events and have done me VERY well.
Price...$1000 shipped.
more pics coming soon.
Any Questions, let me know!!!
RM-DSM Front and Rear Sway bars w/(like new) end-links. $250 shipped
RC 550cc Injectors $150shipped
DSM-link v2 w/ECU $650 shipped
FMIC “kit” 2.5in short route I/C piping, 1g BOV (Crushed), in good condition with a few bent fins, used for only a few months at most. $350 shipped
lower I/C pipe (heat wrap included):
http://www.dsmsupport.com/images/asm/dizmmv2/02-06-08_1849.jpg
I/C:
http://www.dsmsupport.com/images/asm/dizmmv2/02-17-08_1721.jpg
Upper I/C Pipe and BOV:
http://www.dsmsupport.com/images/asm/dizmmv2/02-06-08_1853.jpg
http://www.dsmsupport.com/images/asm/dizmmv2/02-06-08_1943.jpg
FP Big T28 Turbo (in ok condition, probably could use a rebuild), compressor outlet turned 180degrees for FMIC setup. Best Offer
http://www.dsmsupport.com/images/asm/dizmmv2/IMG_3664.jpg
6 bolt crank, would need to be turned, $50 plus actual shipping
2g (1997) 7bolt crank, would need to be turned, $50 plus actual shipping
3bar GM Map Sensor with pigtail, $40 shipped
7 bolt ACT 11lb Flywheel, $75 shipped
Real HKS BOV w/recirculation kit and flange, $155 shipped
--------------------------------------------------------------
Wilwood 13in x 1.25in 4-piston brake setup:
HD Race Kit from Todd at TCE Performance
4piston Forged Superlite Caliper with stainless steel pistons
Steel tab mount brackets
Aluminum rotor hats
Directional Vane rotors
Gas slotted, Zinc plated
SS Brake lines
2-sets of the B compound Race Brake Pads
1-set of the BP10 "street/auto-x" pads
This is a complete BOLT-ON and go kit. This kit works AWESOME!!! There is no describing the braking power with this kit. This kit also works awesome with the stock rear brake setup, no need for adjustable poportion valves or bigger brakes in the rear.
Price is $950, that is nearly half the price that i paid for this kit bran new with all the stuff.
http://www.dsmsupport.com/images/asm/dizmmv2/03-20-08_1416.jpg
http://www.dsmsupport.com/images/asm/dizmmv2/03-20-08_1414.jpg
http://www.dsmsupport.com/images/asm/dizmmv2/IMG_4010.jpg
--------------------------------------------------------------
Full Coil-over setup:
Koni Sport Shocks ($620 bran new)
GroundControl sleeves, perches, & coaxial hats
RRE pillowballs
HyperCoil Springs (650lb Front / 425lb Rear)
Free install and corner-weighting service (provided by ASM Corner-weighting, central wisconsin)
These have about 20k total miles on them. I also have extra parts such as some helper springs, extra spring perches, extra set of softer springs, hats, ect...
Also I might add this is the suspension setup that JTCinders (Jtoby, DSMtuners wiseman and suspension gooroo) has designed and setup. This is near the best of the best suspension you can get. This setup has won Jtoby many events and have done me VERY well.
Price...$1000 shipped.
more pics coming soon.
Any Questions, let me know!!!