stroker

[dsm430]

i need to know if i use my rods and pistons or get diff ones i would imagine i need new ones, but if i dont ill stroke my motor ....i allready have good rods and pistons????? or do you use all the crap out of the 4g64 how strong is that stuff?

[dragonov_elite]

well there are a couple if ways to make a 4g63 a stroker. what size of stroker are you looking at building? if its a 2.3l you will need to get a custom piston with the rist pin moved up and a stroker crank. If it is a 2.4l you will need the 4g64 block i believe and the 4g64 crank. someone chime in please if i am wrong.

[Stash]

Technically the 2.4 isn't a "stroker" seeing as how you are not changing the crank, rod or piston geometry.